Plastisol PC is a series product with great properties of opaque. Plastisol PC is highly recommended to apply both on deep-color base and white base fabrics. Moreover, during printing process, water-base and solvent-base colors are not allowed to be mixed with Plastisol PC, nevertheless, all color pastes of Plastisol PC can be mixed to get under requirement.
Plastisol EL is a series Product with fluorescence and by auxiliaries.
Plastisol OC is an original quadri-chromatic(four-color-base) type pastes. The type products are mainly applied for creating various colors.
Diluent This Diluent is always applied to dilute while Plastisol PC, EL and OC series are too thick to be used. There is no limit to the quantity for dilution. Use Diluent with required color pastes. Moreover, the drying time remains the same as standard.
Softener This Softener is applied to make the hand-touch with better feeling. After applying to print by Plastisol PC, EL and OC series.
a. The quantity applied should be from 3%~10%
b. The more quantity applied, the softer the printed fabrics performed. However, longer duying time should be made.
c. The quantity applied should be carefully considered.
At 175C~180C, 2~3 min
DO NOT STORE NEAR HEAT. USE IN A WELL VENTILATED AREA; IF HEAT IS USED FOR CURING BE SURE THAT THERE IS SUFFICIENT LOCAL MECHANICAL EXHAUST TO CARRY OFF ANY FUMES. KEEP CONTAINER CLOSED WHEN NOT IN USE. AVOID GETTING IN EYES OR PROLONGED OR REPEATED CONTACT WITH SKIN. KEEP OUT OF REACH OF CHILDREN.
FIRST AID :
EYE CONTACT : FLUSH WELL WITH RUNNING WATER FOR AT
LEAST 15 MINUTED AND SEE A PHYSICIAN.
SKIN CONTACT : WASH WELL SOAP AND WATER OR INK-OFF HAND CLEANER.
INGESTION : CALL A PHYSICIAN.